Mitigations and fixes

If successful, your PC will make the "device connected" sound, and MPtools will display a or the drive will appear as "Ready" or "Loader Mode." This is the "hot" moment – the firmware is temporarily live.

If you do not have a matching ISP_Code.bin and ISP_Data.bin for your specific NAND (Toshiba, SanDisk, Intel), do not proceed. Using wrong firmware will corrupt the NAND's bad block table permanently.

Use "Standard Scan" for first attempts; use "Factory Scan" for severe corruption.

Set to "Auto" or the true capacity identified by the Flash ID.