Balaji Info Lube Gps Tracker 30 Driver Download Upd __top__ 【2026 Edition】

for "Ports (COM & LPT)" to see if the driver is correctly assigned a COM port.

: Official support is typically provided via WhatsApp at +91-9358409099 or through authorized retailers like Balaji USB GPS Receiver on Amazon. Installation Steps : Unzip the downloaded driver folder. Run driver-for-64bit.exe (preferably as an Administrator). balaji info lube gps tracker 30 driver download upd

| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Prolific counterfeit chip detection | Use older driver version (v3.3.2.107) or switch to Windows 7 compatibility mode. | | Config Tool cannot find COM port | Driver not loaded or wrong baud rate | Reinstall driver. Try baud rates 4800, 9600, 19200. | | .upd file fails at 50% | Corrupted file or wrong hardware version | Redownload the .upd . Verify with the seller that this .upd is for Tracker 30 (not Tracker 35/40). | | Tracker not responding after update | Incomplete flash or power loss | Perform a hard reset: Disconnect battery, hold reset button (small pinhole) for 20 sec, reconnect. Then reflash. | | Windows says “Unknown Device” | Missing USB-serial chip driver | Unplug device. Install CH340 and Prolific drivers both (one will work). Then replug. | for "Ports (COM & LPT)" to see if

The (specifically related to the Balaji USB GPS Receiver Run driver-for-64bit