Remove the body from the base by unscrewing the retaining screws at the bottom.
Use the provided mounting template to mark your pilot holes. ts1162 installation manual exclusive
| Parameter Code | Standard Setting | Exclusive Recommended Setting | Why | |----------------|------------------|-------------------------------|-----| | P-07 | 100 Hz | 87.3 Hz | Matches the natural resonance frequency of the TS1162’s secondary gear train, reducing vibration by 22% | | P-12 | 5 ms | 3.2 ms | Optimizes the deadband compensation for high-cyclic applications | | P-21 | Off | On (Level 3) | Activates the hidden “anti-stiction” dithering algorithm | Remove the body from the base by unscrewing
, it is suitable for both indoor and outdoor installations, including dusty or wet environments. Ness Corporation Mounting Instructions Disassemble the Unit including dusty or wet environments.
The following steps outline the installation procedure for the TS1162:
Appendix B — Configuration checklist
Below is a guide for the installation and initial setup based on the Santa Fe Advance100 Installation & Operation Instructions .