Press power button for 3 seconds. Display will show firmware version, then "READY".
: Separate 230V cables from low-voltage ones. Insert them through specific holes in the base and secure with a cable gland. Initial Setup : Switch on the power; two red LEDs should flash. Radio Control : Press the Press power button for 3 seconds
: Points for applying grease to the guide rails to maintain quiet operation. Safety Testing Press power button for 3 seconds
Attach the front header bracket to the wall above the door and the rear bracket to the ceiling. Press power button for 3 seconds
Contact Life Probo PR70 support at 1-800-555-PROBO (Mon-Fri, 9-5 EST). Have your serial number (located under the drip tray) ready.
Press power button for 3 seconds. Display will show firmware version, then "READY".
: Separate 230V cables from low-voltage ones. Insert them through specific holes in the base and secure with a cable gland. Initial Setup : Switch on the power; two red LEDs should flash. Radio Control : Press the
: Points for applying grease to the guide rails to maintain quiet operation. Safety Testing
Attach the front header bracket to the wall above the door and the rear bracket to the ceiling.
Contact Life Probo PR70 support at 1-800-555-PROBO (Mon-Fri, 9-5 EST). Have your serial number (located under the drip tray) ready.