⚠️ : The PC Adapter USB A2 requires external 24V DC power when used on PROFIBUS networks longer than 50m or with many nodes. Connect the green terminal block to a 24V supply.
The (article number 6GK1571-0BA00-0AA0 ) is a critical hardware interface for connecting programming devices or PCs to SIMATIC S7 automation systems via PROFIBUS or MPI . This adapter is officially supported on Windows XP (Service Pack 2 and higher) as well as newer versions like Windows 7 and Windows 10. Driver Availability and Installation for Windows XP
Using USB 3.0 hubs:
Thus, finding and correctly installing the remains a critical task for thousands of factories worldwide.
: Once the "Simatic Device Drivers" installation finishes, restart the computer. Hardware Connection
Option A — Using an installer (recommended when available)
After driver installation completes, plug the USB A2 into a USB port. Windows XP should detect it and automatically load the driver. You might see a bubble notification: “New device installed – Siemens PC Adapter USB A2.”
| Issue | Solution | |-------|----------| | "Driver not signed" | Ignore warning (XP accepts unsigned drivers if you confirm) | | Adapter not recognized | Try different USB port, reinstall driver | | Error 10 (device cannot start) | Install for XP | | Missing DLL errors | Install Siemens USB Common Driver from same support entry |
Siemens Pc Adapter Usb A2 Driver Windows Xp Updated Jun 2026
⚠️ : The PC Adapter USB A2 requires external 24V DC power when used on PROFIBUS networks longer than 50m or with many nodes. Connect the green terminal block to a 24V supply.
The (article number 6GK1571-0BA00-0AA0 ) is a critical hardware interface for connecting programming devices or PCs to SIMATIC S7 automation systems via PROFIBUS or MPI . This adapter is officially supported on Windows XP (Service Pack 2 and higher) as well as newer versions like Windows 7 and Windows 10. Driver Availability and Installation for Windows XP
Using USB 3.0 hubs:
Thus, finding and correctly installing the remains a critical task for thousands of factories worldwide.
: Once the "Simatic Device Drivers" installation finishes, restart the computer. Hardware Connection siemens pc adapter usb a2 driver windows xp
Option A — Using an installer (recommended when available)
After driver installation completes, plug the USB A2 into a USB port. Windows XP should detect it and automatically load the driver. You might see a bubble notification: “New device installed – Siemens PC Adapter USB A2.” ⚠️ : The PC Adapter USB A2 requires
| Issue | Solution | |-------|----------| | "Driver not signed" | Ignore warning (XP accepts unsigned drivers if you confirm) | | Adapter not recognized | Try different USB port, reinstall driver | | Error 10 (device cannot start) | Install for XP | | Missing DLL errors | Install Siemens USB Common Driver from same support entry |
